Check out daily specials on eBay & eBid
Official PayPal Seal
Always be prepared for whatever your next
adventure might bring your way.
Here at HikePro we specialize in the
Ultimate 550 Paracord Survival Gear,
Accessories, and lots more.
All our paracord products are hand-made
from real 550 paracord right here in the
USA, and are designed to help you when
emergency strikes.
HikePro
@hikepro_llc
Copyright HikePRO - All rights reserved.
Like Us on Facebook
Follow on Twitter
How to connect:
Customer Support
Products:
Misc. Products
Information:
Follow on Instagram
Subscribe on YouTube
Choose Shipping:
Order Notes:
$9.99 msrp
Magblock Universal Pistol Limiter Kit
Images:
(Click to enlarge)
NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting
with the length to get the fit they want. We do offer these as an option for some magazines
already precut.  Now you have an option if we do not have a limiter available for your
specific magazine with the recent law changes. If they don't work out for you just send them
back for a refund or exchange.

- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.
- Comes with one universal base, an adjustable slide, and a bottom lock plate which is
optional to use. Highly recommend using optional Magblock Cement below.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be
epoxied if desired.
- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the
follower.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to
much less than 10 rounds.

Refrence page. Lengths for tested magazines:
Universal Pistol Limiter Instructions
Magazine Blocks
MagazineBlocks (patented) developed as a way to easily convert standard and high
capacity magazines to a lower capacity to help sportsmen, hunters, and other firearms
owners more easily comply with regulations and sporting events when magazine capacity
may be limited. We offer a full line of 10 and 15 round limiters.
As many sportsmen know there are multiple reasons to convert a magazine instead of buying
lower capacity magazines. Many firearms are designed to use magazines greater than 10
rounds so the size of the magazine is important. A larger magazine ejects more reliably, has
greater surface area for better reload control, allows mounting of certain accessories, and
allow the use of more reliable magazines from manufacturers who do not offer lower
capacities. Not to mention they just look better.
Must be 21year old and up to purchase any items on this page.  Buyer assumes full risk and
responsibility of properly using products below..
Buyer responsible for checking all local laws, to make sure product being purchased is legal
in their state/region.   Any orders placed for locations where the specific product is illegal to
own will be cancelled and charged a 20% restocking fee.
Pistol Magblocks
Quick Overview:

Magblock Universal Pistol Limiter kit allows for an easy
custom solution for most standard pistol magazines.
Requires cutting of the Magblock for a custom fit. As shipped
it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal.
Choose Shipping:
Order Notes:
$9.99 msrp
Glock 17 and 34 Magblock 10/17 (9mm)
Images:
(Click to enlarge)
- Fits 17 round 9mm Glock 17 and Glock 34 and Glock 19X magazines.  *See details on
correct follower types below.
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Will also fit Glock 19X  -17 round magazines.

* Please click the photos for installation instructions. Fits newer generation full metal lined
Glock Magazines.
Only compatible with the follower type shown in the pictures.

New patent pending design allows this limiter to be adapted to fit all other Glock 9mm and .40
magazines including a 15 round option for the Glock 17 magazine. Cutting using an
appropriate tool is required. Pre-cut limiters are available.
Quick Overview:
Glock 17 and Glock 34 (9mm) Magblock
Choose Shipping:
Order Notes:
$9.99 msrp
Glock 19 Magblock 10/15 (9mm)
Images:
(Click to enlarge)
- Fits 15 round 9mm Foctory Glock 19 magazines.  *See details on correct follower types
below.
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

* Please click the photos for installation instructions. Fits newer generation full metal lined
Glock Magazines.
Only compatible with the follower type shown in the pictures. If you have older followers we
offer a different product.
Quick Overview:
Glock 19 (9mm) Magblock
Choose Shipping:
Order Notes:
$9.99 msrp
Glock 19X Magblock 10/19 (9mm)
Images:
(Click to enlarge)
This Magblock fits the Glock 19X magazines with the +2 extended base. (19 round
magazines)  and will limit them to 10 rounds.  
- This is a 2 part limiter. It is a -17 round limiter under the follower, then a -2 adapter to limit the
extended floorplate.
- Easily installed in seconds. It is held in place with spring tension alone or can be glued or
epoxied if desired.
-Simple install to make 10/19 Glock 19X magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

PATENT # 9328982 B2, Additional Patents Pending
* Please click the photos for installation instructions. Fits newer generation full metal lined
Glock Magazines.
Only compatible with the follower type shown in the pictures.
Quick Overview:
Glock 19X Magblock 10/19 (9mm)
If you don't see what you need here contact us and
will confirm availability
Choose Shipping:
Order Notes:
$9.99 msrp
Beretta 92 Magblock 10 Round Limiter 10/17 (9mm)
Images:
(Click to enlarge)
This Magblock fits the factory Beretta 92 17 round 9mm magazines and will limit them to 10
rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is
installed under the block. It is held in place with spring tension alone or can be glued or
epoxied if desired.

- Simple install to make 10/17 Beretta 92 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 92 magazines as seen in the photos. Other types of
magazines will likely require modification of the limiter.

*Please click on photos for installation instructions.

*Universal Limiter Instructions: Cut to #14 and glue flush at the bottom for 10/17 limiter. Slide
lock is not used. When epoxy cures assemble magazine. The two parts of the universal
limiter must be glued flush to prevent the locking plate from causing the limiter to shift
sideways. #14 will show in the limiter window notch like in the photos.
Quick Overview:
Beretta 92 Magblock 10/17 (9mm) 10 Round Limiter
Choose Shipping:
Order Notes:
$9.99 msrp
Images:
(Click to enlarge)
- Fits 17 round 9mm CZ-75B and CZ-75 SP01 magazines as shown in the photos.
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested on CZ-75 magazines made by Mec-Gar as shown in
the photos.

*If using our Universal Limiter for this magazine: Cut to #11 and glue flush at the bottom for
10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. #11 will show in
the limiter window notch like in the photos.  
Quick Overview:
Magblock 10 Round Limiter for CZ 75B Full Size 9mm 17
Round Magazines
Choose Shipping:
Order Notes:
$9.99 msrp
CZ-75 Magblock 10/17 (9mm)    (CZ-75 SP-01 and CZ Shadow 2)
Images:
(Click to enlarge)
- Fits 17 round 9mm CZ-75 SP-01 and CZ Shadow 2 magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

*If using our Universal Limiter for this magazine: Cut to #11 and glue flush at the bottom for
10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. #11 will show in
the limiter window notch like in the photos.  
Magblock 10 Round Limiter for CZ-75 17 Round Magazines
Choose Shipping:
Order Notes:
$9.99 msrp
Sig Sauer P226 Magblock 10/18 (9mm)
Images:
(Click to enlarge)
- Fits 18 round 9mm Sig P226 magazines made by Mec-Gar.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

*This Limiter can be made using the Universal Pistol Limiter by cutting flush at the base with
#16 in the indicator notch.
*The product sold at this link is pre-cut and fixed at this length.
Quick Overview:
Magblock 10 Round Limiter for Sig P226 18 Round Magazines
Choose Shipping:
Order Notes:
$9.99 msrp
Sig Sauer P320/P250 Magblock 10/17 Limiter (9mm)
Images:
(Click to enlarge)
Magblock 10 Round Limiter for Sig P320 17 Round Magazines

- Fits 17 round 9mm Factory Sig P320 and P250 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant polymer.
- Will also work with the X-Carry model magazines.
Choose Shipping:
Order Notes:
$9.99 msrp
Springfield XDM 9mm 10/19 Magblock 10 Round Limiter
Images:
(Click to enlarge)
Springfield XDM 9mm Magblock

- Fits 19 round 9mm XDM magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
CZ-75B 10/17 Limiter (9mm)
Choose Shipping:
Order Notes:
$9.99 msrp
CZ P-09 Magblock 10/19 (9mm)
Images:
(Click to enlarge)
Magblock 10 Round Limiter for CZ P-09 (9mm) 19 Round
Magazines
- Fits 19 round 9mm CZ P-09 magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent
modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.
Choose Shipping:
Order Notes:
$9.99 msrp
Smith & Wesson M&P 9mm Full Size 10/17 Magblock (10 Round Limiters)
Images:
(Click to enlarge)
- Fits 17 round 9mm M&P magazines.
- Will also fit 2.0 models
- Also reported to work with full frame magazines limited to 15 rounds that have extra
spring coils at the base of the magazine. (see photos)
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W and Promag Magazines.

*Please click on photos at left for installation instructions. New design installs at the base
of the spring and sits on top of the original locking plate.

*Universal Pistol Limiter Instructions: Cut to #14 and glue flush at the bottom for 10/17
limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the
universal limiter must be glued flush to prevent the locking plate from causing the limiter to
shift sideways. #14 will show in the limiter window notch like in the photos.  
Quick Overview:
Smith & Wesson M&P Full Size 9mm Magblock 10 Round
Limiters
All orders ship USPS Mail.  No extra shipping  fees charged if multi qty ordered for same item.   Lead time is 1-5 depending on stock.
International orders are welcome.  Note there will be additional International Shipping fees charged after order is placed.